Payment & Shipping Terms:
|Package:||In Paper Box||DIA:||3/16"|
Besides of Hexmesh, Hesly metal also make and supply Armour-Anchors which can be used in combination with Hexmesh / Flexmetals or as stand alone systems. HESLY's anchors types are below:
Plate Formed Anchors are divided into Metallic Anchors and Ceramic Supports. The Metallic Anchors are designed typically for ceramic fiber and for light or medium weight refractories, again configured to provide maximum retention during plant service. The Ceramic Anchor Supports "C" Clips are designed to retain most standard pattern ceramic anchors (Scissor Clip types are available as wire formed) Mainly for light and medium weight duties, their typically small cross section provides low heat transfer with section size providing easy manual or semi-automatic welding. "C" Clips retain ceramic anchors used for anchoring moldable refractories.
Rod Formed Anchors / Studs (larger than 3/8" diameter) Heavy weight anchors are used only in the most arduous conditions. They are designed to provide support and attachment of refractory pre-cast sections to plant steelwork, and provide an effective anchoring system in high stress situations. Their design shape minimizes and controls heat transfer and thus provides maximum strength at elevated temperatures. Refractory lining situations that have attendant high live loads occur in plant such as Rotary Kilns, where deep roof and side wall lining of dense refractories require maximum support during operating conditions or heavy weight pre-cast blocks are retained by bolt through, weld on and slip on systems.
Wire Formed Anchors are configured to suit all light, medium and dense refractories in providing maximum support during refractory application and maximum retention of refractories during plant service. Consideration is given to expansion, heat transfer, method of application, environmental conditions and design of host unit for individual applications. Standard designs are defined in our data sheet catalogue. Anchors are designed for Manual and Semi-Automatic Welding.
The range of applications is limited only by the structural strength of the anchor section. The maximum section size of wire formed anchors is 3/8" (9.5mm). Typical applications include most process plant including furnaces, ductwork, heaters or reactors.
Hexsteel: Bonding Hole Type
Instead of lance tabs, holes are punched through the walls of the hexmetal cell. Refractory can then flow through these holes to achieve a bond from one cell to another.
Hex-metal: Prongs/Lances Type
this style has lance tabs protruding from the walls of the hexagonal cell to act as anchorage for the refractory.
Alloys behave differently in different environments and temperatures. Therefore the choice of material is cirtical for the refractory anchors. HESLY's experience and assist with determining the most appropriate materials for each individual application.
|Anchorage Material||Chemical Composition||
|S Anchors||Corner Anchors|
|Wire Anchor||Plate Tab|
|U Anchors||Plate Punched Anchors|
Package and Delivery
|Refractory Anchor||Refractory Anchors China|
|HESLY CHINA HEXMESH & ANCHORS FACTORY|
|+86 188 3181 6606 (whatsapp/wechat)|