AISI310S Hexmetal refractory lining 20mm Depth X 14ga THK| 36" X 120"

DESIGN

Hexmetal is a an unique honeycombed steel designed to provide excellent retention and reinforcement of thin wall refractories and fully complements dense hydraulic and chemically bonded refractories in resisting erosion.

Applications

Process plant which is subject to the passage of erosive gas streams, especially at high temperature, benefit by cladding with Hexmetal infilled with erosion resistant refractories. Typical applications include Cyclones, Flue Gas Lines, Reactor Vessels, Windboxes, Fan Casings, Burner Quarls: in fact any vessel or section that is subject to erosion or abrasion.

FOR REFRACTORIES
The flexibility, high strength and erosion resistant characteristics of Hexmesh make it an excellent choice for refractory linings in furnaces, reactors, cyclones, ducts and flues.
FOR FLOORS
Hexmesh provides long term protection for armor applications inside industrial floors. Specifically, loading docks, ramps, high traffic aisles for forklifts and trucks. Hot floors for foundries, forge shops and steel mills. Refuse and recycle disposal plant floors and almost anywhere floors are subject to severe impact and rolling loads. All will benefit with Hexmesh

Hot gaseous substances cannot erode the refractory because they are reflected away from the surface by the metal honeycomb- shaped grid.

The flexibility of HESLY’s Hexmesh allows it to be rolled, and easily conforms to circular shapes. It is recommended for use when placement is spaced from the steel shell to allow room for thick insulation between the metal shell and the armoured surface.

Standard Bonding Hole Pattern	Lance Pattern

Flexmetals

Design
Flexmetal is the direct counterpart of Hexmetal, it performs all the same functions of reinforcement of thin wall refractory linings, its design however allows freeform rolling to very small diameters.
Application
Hexmetal becomes impractical to use when the section of plant being protected is of small diameter, the free rolling capabilities of Flexmetal allows plant as small as 150mm to lined. Typical applications include Air Distributors, Cyclone Diplegs, Fan Cases, all plant where the practicality of free rolling material is beneficial to maintenance activities.

HESLY HexMetal Typical Service Temperature:

Specification Table of Hexmetal

Hexsteel Photo Showcase

2" depth 310S HexMetal Grid	2" depth 310S Hexmetal Grid
AISI310S Hex Metal Grating	AISI310S Hex Metal Grating
Hexmetals with reinforced strip	Hexmetals with reinforced strip
60mm Depth Hex metal grating with lances	60mm Depth Hex metal grating with lances